Cartesian robots – XW-VIP series
The top-entry robots of the XW-VIP series represent the ideal solution for any handling of moulded pieces.
They are available with pre-programmed operative modes; alternatively, the operator can opt for the free programming.
The main advantages of the series are:
- the enormous potential of the STEC-520B controller
- its very short extraction times
- its low energy consumption
- its constructive solidity
- the plethora of customisable options.
Superior versatility
The robots of the XW-VIP series are particularly suitable on automation systems performing insert loading operations, IML and when the interface with other equipment in the cell is required.
All the of the XW-VIP robots are equipped with high-quality prismatic guide with special recirculating ball bearings; the drive to the axes is performed by brushless motors which convey the movement by means of toothed belts; these factors guarantee a precision positioning of ± 0.1mm.
The lay-out of the robot has been designed in order to considerably reduce the volume taken up around the IMM; the height of the robot is likewise reduced, thanks the to the telescopic vertical arm. All these features make this robot very fast.
.png?1719501834)
CONTROLLER: STEC-520B
Safety above all
The anti-collision detector (available with 5 levels of detecting and sensitivity) recognizes forthcoming collisions and immediately stops the robot, limiting any possible damage.
Moreover, the vibration control system ensures smooth movements at high speeds and increased stability during extraction.
.jpg?1719501833)
Energy saving
With our Eco mode you can save up to the 25% of power consumption, thanks the temporary stopping of the servo motor and the turning off of the pendant background light.
The automatic interruption of air supply to the vacuum generator allows to save on air consumption when extracting the product.
And there is more: speed and acceleration of the robot are automatically adjusted by conforming the operation cycle to the moulding time, ensuring energy saving and noise and wear reduction.
Don’t forget the end-of-arm tooling!
Star Automation Europe supplies components for end-of-arm-toolings, developed following the most innovative Japanese technology. All the components are totally compatible with other brands and can also be used on robots made by other manufacturers.
Available versions:
XW-VIP
3-axes robots.
XW-sVIP
5-axes robot with additional vertical for sprue extraction for third-plate moulds.
XW-VIP 2V
5-axes robot with two verticals for product extraction for stack moulds.
XW-VIP H
Longitudinal robots for space reduction with moulded product release at the end of the IMM.
.png?1719469234)
.png?1719469450)
.png?1719469462)